SO-Pd11 beacon

Use:

The beacon SO-Pd11 is destined for optical signalling by the set of LED diodes in fire alarm systems. The SO-Pd11 optical alarm device is intended for indoor applications.


Construction:

The SO-Pd11 beacon consists of two main parts. The first of which is the right alarm device in a housing of non-combustible material. It contains supply voltage terminals and pins which allow you to select one of three different flash frequencies or to turn on continuous lighting. The second part – a socket is an element which fixes the alarm device to the ceiling or wall by the PIP-3AN cable junction box or by means of two screws and anchor pegs.


Opening:

To open the alarm device you should: twist the shade to the left while holding the base. After that move apart the shade and the base.

Closing:

To close the alarm device you should adjust the markers. After that assemble the device and twist it to the direction marked with an arrow (sequence shown in the drawing).

SO-Pd11 closing scheme

Type beacon
Supply voltage 24 V DC
Current consumption in the off-state 0 mA
Current consumption at 24 V DC <60 mA
Ingress protection IP53D
Weight ~150 g
Dimensions Ø 115×63 mm
Cooperating installation box PIP-3AN

SO-Pd11 connection diagram:

Jumper settings:

Continuous: continuous light
0.25s: flash frequency 4 Hz
1s: flash frequency 1 Hz
2s: flash frequency 0.5 Hz

Cooperating products

osłona zabezpieczająca OZ-40

OZ-40-2 cover

Use: The OZ-40-2 cover is destined to protect W2 signalling devices as well as fire detectors or other devices which…

puszka instalacyjna PIP-1AN

PIP-3AN cable distribution junction box

PIP-3AN CABLE DISTRIBUTION JUNCTION BOX HOLDS DOCUMENTS ISSUED BY CNBOP-PIB: NATIONAL CERTIFICATE OF CONSTANCY OF PERFORMANCE NO. 063-UWB-0194 NATIONAL TECHNICAL…

Choose language